The University of Tennessee, Knoxville

Tennessee County Municipal Advisory Service

You are here

Managing Infiltration Inflow in Wastewater Collection Systems

Reference Number: MTAS-587
Tennessee Code Annotated
Reviewed Date: September 11, 2017
Printer-friendly versionSend by emailPDF Version

What Is Infiltration/Inflow (I/I)?
Infliltration is water that enters the sewage collection system from the soil through foundation drains, defective pipes or joints and faulty connections (i.e., ground water).

Inflow is water that enters the sewage collection system from sources such as roof down spouts, basement and yard drains and cross connections with drainage lines (i.e., surface or rainwater).

If you have a wastewater collection system, chances are you have infiltration and inflow (I/I) problems. Many systems have recognized I/I problems, but they are not addressed because the problems seem overwhelming — both in terms of money and manpower.

Is It Really I/I?
When an overflow occurs in the system, you may think it is I/I. But, it could be

  • debris, roots, or grease in the system, restricting flow;
  • sags in lines;
  • protruding taps;
  • collapsed lines due to corrosion;
  • design bottlenecks; or
  • pump station problems — leaking check valves, improperly sized impeller, improperly sized motor, impeller wear, etc.
  • forced main issues- corrosion, sedement, air locking, etc.